6m Aluminium Hardtop
Fishing Boat NZ | Flyfin 2050HT
The Flyfin 2050HT is a 6m aluminium hardtop boat, 6.1m overall, designed and built by Flyfin Boats in Papamoa Beach, New Zealand. Its deep-V hull handles open-water chop with confidence, and the hardtop keeps your crew comfortable when the weather turns. As the entry point to the Flyfin Hardtop range and rated for 115 to 200 hp, it’s a 6m hardtop fishing boat you won’t outgrow in a season, with enough width to fish properly, enough protection to bring the family along, and a single-axle trailer that makes it easy to tow and launch. See the full 2050HT specifications →
- 6m Performance Hull
- Flyfin Trailer
- Suzuki 140 HP*
Flyfin 2050HT Package
From $99,978 NZD
The standard package includes the 6m hull, a Suzuki 140 hp outboard and a custom-built Flyfin Trailer, matched and ready to launch when it leaves Papamoa Beach. The final price depends on your layout and chosen options.
Why the 2050HT?
Hull & Ride
The 2050HT sits on the same offshore-capable deep-V hull as every boat in the Hardtop range. The bow sits high, the sheer line carries it through a chop, and the full-buoyancy hull is built to carry a properly sized outboard.
Systems
Simple, reliable systems suited to a boat you'll use often: a 12V wiring loom, a 6-way backlit Flyfin LED switch panel, a 1200 GPH automatic bilge pump (auto and manual), and a 150L built-in fuel tank with expansion tank. Everything's positioned for easy access from the rear of the helm.
Comfort & Layout
A genuine hardtop cabin with a carpeted forward berth, slim mullions for an open view from the helm. The raised, full-width cockpit floor drains itself through side scupper drains, and the walk-through design means getting from cockpit to bow without a challenge.
Flyfin Trailer
The 2050HT is the only model in the Hardtop range built on a single-axle trailer. Custom-built and extra-low for easy launching and retrieval, it's the easiest Flyfin hardtop to tow, store and handle at the ramp.
All Specifications
*Specifications may vary based on chosen equipment.
Performance may vary due to equipment, weather and load conditions.
What Comes Standard on the 2050HT
Every Hard Top 2050 ships fully equipped as standard — see the full feature list and specification below. Beyond that baseline, configuration can still be adjusted to suit intended use and onboard preferences.
01Hull & structure
- Offshore performance deep-V hull
- Large bow and high sheer line
- Long waterline length for better performance and fuel efficiency — no motor pod extension
- Full buoyancy hull for large-weight engines
- Sealed buoyancy compartments
- Flooding ballast compartment (approx. 390L)
- Fully welded aluminium rub rail
- Large swim platform
02Deck hardware & fittings
- Built-in bow fairlead and roller
- Bow rail — 38mm rail, 32mm stanchion (standard)
- Welded aluminium cleats x3
- Welded stern grab rails
- Welded foot rests
- Walk-through for easy boarding
- Trim tab plates
- Large transducer mounts, port and starboard
- Flat floor, U-Deck ready
- U-Deck safety pads in essential areas (if U-Deck not optioned)
03Hardtop & glass
- Large panoramic glass with small mullions for a light, modern, unobstructed view
- Toughened glass with light grey tint
- Fully glued structural glass for a strong, clean look
- Large forward hardtop brow to reduce sun and glare
- 2 x full welded roof grab rails — top of hardtop
- 2 x full welded aft hardtop grab rails
04Fishing & storage
- 6 x full welded rod holders
- 7 x full welded rod holders — back of hardtop
- In-built internal shelves x2
- Driver and passenger side pockets
05Cabin & comfort
- Carpeted forward cabin
- Cabin squabs x3, optional infill
- Drop-down cabin floor
- Cabin hatch, forward cabin
- Pedestal seat bases with Flyfin sports seats
06Helm & dash
- Piano black acrylic dash
- Large dash top with fiddle rail
- 6-way backlit switch panel
- 6 drink holders
- SeaStar non-feedback premium cable steering
- Flyfin multi-spoke heavy-duty premium steering wheel
- Easy-access panel at the back of the helm for servicing
07Fuel, electrical & drainage
- Built-in fuel tank, 150L
- In-built fuel expansion tank
- 12V fuel level sender
- 12V wiring loom
- Engineered dual-battery compatible
- Raised battery compartment
- Black aft battery compartment hatches
- Narva LED navigation lights — side, plus anchor/steaming light
- 1200GPH automatic bilge pump, auto + manual
- Through-hull water pick-up x1
- Easy-drain cockpit floor with side scupper drains
08Trailer
- 5mm 5083 extra heavy-duty welded frame — single axle
- Folded main beams for stiffness and excellent road holding
- Open channel design for easy cleaning
- Extra-low design for easy launching
- 13" black alloy wheels, large-profile 195 R13C tyres
- 1800kg axle rating, leaf spring
- Trojan axles and hub assembly
- Narva LED submersible lights
- Aft tail light protection
- Trojan duo hitch
- Trojan 10:1 winch
- Extra heavy-duty solid jockey wheel, 350kg
- Built-in structural walk board
- Side steps on mudguards
- Flyfin Easy Load slipper bunks with nylon strip
- Solid welded snubber block for tight securing of the boat
- Optional multi-roller set-up
- Optional stone guard
- LOA
- 6.1m
- BOA
- 2.35m
- Height on trailer*
- 3m
- Length on trailer*
- 8m
- Dry hull weight
- 750kg
- Max payload
- 527kg
- Trailer weight
- 1300kg – 1800kg
- Dead rise
- 18°
- Recommended HP
- 115–200hp
- Fuel tank
- 150L
- Hull thickness
- 6mm
- Transom & engine mount
- 6mm
- Structure, cockpit sole
- 4mm
- Top sides / cabin
- 4mm
- Hard top
- 3mm
* May vary depending on specification.
Configure Your Flyfin 2050HT
The entry point to the Hardtop range, available as a full cabin boat or stripped back to an open layout depending on your personal preferences. Every layout on a given model shares the same offshore-bred hull, dimensions and construction standard.
Key Features and Accessories for Your 6m Aluminium Hardtop Boat
Ready for More Range? Meet the Flyfin 2100HT
6.6m Length · 2.5m Beam · 150–225HP · 200L fuel · Seats 6–8
Frequently Asked Questions
The Flyfin 2050HT is a 6m aluminium hardtop boat, 6.1m overall, designed and built by Flyfin Boats in Papamoa Beach, New Zealand. It's the entry point to the Flyfin Hardtop range, fully welded from 5083 marine-grade aluminium and rated for 115 to 200 hp outboards.
The 2100HT is 500mm longer, with a wider beam, an extended sleeping cabin, a larger fuel tank and more power headroom. The 2050HT is the entry point to the Hardtop range, highly capable offshore and easy to tow, launch and handle, and it's the only Flyfin hardtop built on a single-axle trailer.
Yes. The 2050HT is the only boat in the Flyfin Hardtop range built on a single-axle trailer. It comes on a custom-built, extra-low Flyfin Aluminium Trailer for easy launching and retrieval, which makes it the easiest Flyfin hardtop to tow, store and handle at the ramp.
Yes. The 2050HT sits on the same offshore-capable deep-V hull as every boat in the Flyfin Hardtop range, with a full-buoyancy hull and sealed underfloor buoyancy. The hardtop gives your crew all-weather protection, and the boat is at home in conditions like the Hauraki Gulf and the Bay of Plenty.
The 2050HT comes with a Suzuki 140 hp outboard fitted as standard and is rated for outboards from 115 to 200 hp. Talk to the Flyfin team about the best engine for how and where you'll use the boat.
Yes. You can choose between hardtop, centre console and cuddy cabin layouts, and tailor seating, storage, accessories and finish options to suit how you fish. Contact the Flyfin team for a quote based on your configuration.
Every Flyfin boat, including the 2050HT, is designed and built in Papamoa Beach in New Zealand's Bay of Plenty by Tino Marine Limited, trading as Flyfin Boats, which has been building boats since 2015.
Flyfin boats include a 10-year comprehensive warranty covering hull construction and workmanship. Contact your dealer for full warranty terms and conditions.