7m Amphibious Boat
NZ | Flyfin 700HTA
Drive down the beach, into the water and out to the fish, with no ramp required. The Flyfin 700HTA is a 7m amphibious boat, 6.96m overall, designed and built by Flyfin Boats in Papamoa Beach, New Zealand, with the Tectrax T3000 Gen2 wheel system built in, not bolted on as an afterthought. As the most compact model in the Amphibious range, it’s the lightest to tow and the easiest to own, while still being confident enough for a proper day’s fishing. See the full 700HTA specifications →
- Tectrax T3000 Gen2
- Mercury 200hp
- Custom-Built Trailer
Flyfin 700HTA Package
From $325,596 NZD
The standard package includes the 6.96m amphibious hull with the Tectrax wheel system, a Mercury 200 hp outboard and a custom-built Flyfin Aluminium Trailer, matched and ready to launch when it leaves Papamoa Beach. The final price depends on your layout and chosen options.
Why the 700HTA?
Compact and manageable
The smallest footprint in the Amphibious range, and the easiest of the four models to launch, tow and handle.
Lightest to tow
If this is your first amphibious boat, the 700HTA is the easiest on the vehicle and the least intimidating to live with day to day.
Confident coastal capability
Built for near-shore and light offshore days. Not a compromise boat, just the right-sized one for getting started.
Standard fit-out
A straightforward finish without the upholstered hardtop lining of the larger models: everything you need, nothing you're paying extra for.
All Specifications
*Specifications may vary based on chosen equipment.
Performance may vary due to equipment, weather and load conditions.
What Comes Standard on the 700 HTA
Every Amphibious 700 HTA leaves our Papamoa factory fully equipped. Below is the complete standard feature list, the Tectrax wheel system and the full specification. From there, we can tailor the setup to how you'll use the boat.
01Engine
- Standard package includes a Mercury 200hp outboard
- Recommended horsepower: 200 to 250hp
- Full buoyancy hull, built to carry heavier engines
02Trailer
- 6mm 5083 extra heavy-duty welded frame, tandem axle
- Double return fold on the main beams for stiffness and excellent road holding
- Open channel design for easy cleaning
- Extra-low design for easy launching
- 13-inch black alloy wheels with large-profile 195 R13C tyres
- Tandem axle with 1500kg axle rating and leaf springs
- Trojan axles and hub assembly
- Trojan duo hitch, 1 7/8-inch and 50mm
- Trojan 10:1 winch
- Extra heavy-duty solid jockey wheel, 350kg
- Narva LED submersible lights with aft tail light protection
- Built-in structural walk board
- Flyfin-designed curved mudguards with side steps
- Flyfin easy-load slipper bunks with nylon strip
- Solid welded snubber block to hold the boat securely
- Optional multi-roller setup
- Optional stone guard
03Steering, trim & anchoring
- Zipwake Pro trim tab system
- SeaStar hydraulic steering
- Savwinch drum winch anchoring system, with anchor and chain
- Tectrax bow wheel camera
04Power, wiring & charging
- Flyfin-engineered dual battery system: start and house battery with switching
- 12V wiring loom
- Push-button breakers for the 12V main house battery, plus 24-hour bilge feed
- Two 6-way backlit switch panels with Flyfin LED push buttons
- Engineered dual battery compatible
- CTEK battery charger supplied, plugs into the Flyfin battery system to keep the boat batteries maintained
05Fuel, bilge & navigation
- Built-in 200L fuel tank with built-in fuel expansion tank
- 12V fuel level sender
- Through-hull water pickup
- Easy-access panel for servicing behind the helm
- 1200GPH automatic bilge pump, auto and manual
- Narva LED navigation lights: side, anchor and steaming light
- Windscreen wiper on the centre window (other windows optional)
06Hull design & performance
- Amphibious-specific hull
- Offshore performance deep-V hull
- Delta and planing strakes for hull lift
- Long waterline length for better performance and fuel efficiency, with no motor pod extension
- Full buoyancy hull for heavier engines
- Sealed buoyancy compartments
- Large bow with a high sheer line
07Finish & deck hardware
- Fully painted in solid standard Flyfin colours
- Fully welded aluminium rub rail
- Bow rail, 38mm rail and 32mm stanchions
- Trim tab plates
08Fittings, cleats & mounts
- Flyfin proprietary-built stern cage and side boarding ladder
- Built-in bow fairlead and roller
- 3 welded aluminium cleats
- Welded stern grab rails
- Large swim platform
- Pedestal seat bases with Flyfin sports seats
- Large transducer mounts, port and starboard
09Cockpit floor & layout
- Full-width raised cockpit floor
- Easy-drain cockpit floor with side scupper drains
- Welded foot rests
- Flat floor, U-Deck ready
- U-Deck safety pads in essential areas (if U-Deck isn't optioned)
- Drop-down cabin floor
10Fishing & hardtop hardware
- 6 fully welded rod holders
- 7 fully welded rod holders on the back of the hardtop
- Fully welded roof grab rails: 2 on top of the hardtop, 2 underneath
- 2 fully welded aft hardtop grab rails
11Hardtop, glazing & trim
- Large forward hardtop brow to reduce sun and glare
- Large panoramic glass with small mullions for a light, modern, unobstructed view
- Toughened glass with a light grey tint
- Fully glued structural glass for a strong, clean look
12Helm & dash
- Piano black acrylic dash
- Large dash top with fiddle rail
- Flyfin multi-spoke heavy-duty premium steering wheel
- Driver and passenger side pockets
13Cabin & storage
- Carpeted forward cabin
- 2 carpeted shelves in the forward cabin
- 4 built-in internal shelves
- Forward cabin hatch
- 3 cabin squabs, with optional infill
- Raised battery compartment with black aft hatches
- 2 under-floor wet lockers, draining to the ballast compartment
14Boarding & comfort
- Stern walk-through for easy boarding
- Easy-use stern wash board flap
- 8 drink holders
Tectrax wheel system: features
- Tectrax T3000 amphibious drive system
- Fully electric, no hydraulic oil system
- Digital integrated steering: steer with the steering wheel or joystick
- Optional range-extending batteries
- Optional DC-DC charging off the outboard
- Optional solar charging for the wheel system
Tectrax wheel system: specifications
- Gross vessel mass (GCM max)
- 3000kg
- Maximum incline angle
- 15°
- Battery voltage
- 48V
- Battery cell technology
- Lithium iron phosphate (LiFePO4)
- Ingress protection
- IP67
- Wheel system warranty
- 3 years
- Battery warranty
- 10 years
Figures above are for the Tectrax T3000, which pairs with the 700 HTA.
- Length overall (LOA)
- 6.96m
- Beam overall (BOA)
- 2.5m
- Height on wheels
- 3m*
- Length on wheels, motor down
- 7.9m*
- Length on wheels, wheels up
- 8m*
- Recommended HP
- 200 to 250hp
- Fuel tank
- 200L
- Max payload
- 580kg
- Dry hull weight
- 850kg
- Weight on wheels
- 2100 to 2300kg
- Deadrise (variable)
- 18° to 43°
- Hull thickness
- 6mm
- Transom and engine mount
- 6mm
- Structure, cockpit sole
- 4mm
- Topsides / cabin
- 4mm
- Hardtop
- 3mm
- Wheel mounts
- 12mm
* May vary depending on specification.
Configure Your Flyfin 700HTA
Every layout on a given model shares the same offshore-bred hull, dimensions and construction standard. You're choosing how the boat works for you, not trading away build quality to get the layout you want.
Key Features and Accessories for Your 7m Amphibious Boat
Find Your Amphibious Flyfin
Four models, one system. The 700, 750, 820 and 850 HTA all share the same amphibious capability, but differ in size and capacity. Use the table below to compare specifications across the range and find the right size for how you’ll use it.
Compare all Specifications and Features Hide Specifications and Features
Specifications & features
01Dimensions
02Weight & payload
03Engine & fuel
04Hull construction
05Tectrax wheel system
06Standard hull features
07Topsides & cabin
08Onboard systems
Going Further? Meet the Flyfin 750HTA
7.5m Length · 2.55m Beam · 225–350HP · 200L fuel · Seats 6–8
Frequently Asked Questions
The Flyfin 700HTA is a 7m amphibious boat, 6.96m overall, designed and built by Flyfin Boats in Papamoa Beach, New Zealand. It's the most compact model in the Flyfin Amphibious range, with the Tectrax T3000 Gen2 wheel system built in so you can drive down the beach and launch without a ramp.
The Tectrax T3000 Gen2 system deploys electrically driven wheels that let the boat drive itself down a suitable beach or shoreline and into the water, with no trailer or boat ramp needed. Once you're afloat, the wheels retract.
Range depends on terrain and battery configuration. The standard 4.7 kWh LiFePO4 battery system supports typical launch and retrieval, and range-extending battery packs are available as an option.
No. The Tectrax system is designed for launching and retrieving at the water's edge, not for road use. The boat travels on its Flyfin Aluminium Trailer, and the wheels take over at the beach.
The Tectrax T3000 Gen2 is rated for inclines of up to 15°, which covers most natural shorelines and boat ramps.
The standard 700HTA package includes a Mercury 200 hp outboard, and the hull is rated for 200 to 250 hp.
The Tectrax system is designed for minimal maintenance. Rinse it with fresh water after saltwater use and follow the Tectrax service schedule. The system is covered by a 3-year warranty, and the battery by a 10-year warranty.